Over on the Raspberry Pi GitHub repository for the arm64 OS we can see arch/arm64/boot/dts/broadcom/bcm2712-rpi-500.dts, ...

After removing the VL805 QFN package and soldering in the bridge PCB, [Zak] confirmed that everything was hooked up properly and attempted to use the Raspberry Pi 4 with a PCIe extender.

Do you remember the BlackBerry handheld? I do, only the senior managers were allowed such coveted devices back in 2007. The ...

with a Bonnet and headers that need to be soldered in to attach it to a Raspberry Pi! It only takes a few minutes but soldering iron and solder are required. Note: The terminal block included with ...

The hardware used in this project consists of the custom Spoke PCB designed by Fox and a Raspberry Pi Pico. Beyond that, all you need is anything that brings your imagination to fruition.

Supports 1 to 8 RX5808 node modules on a single PCB The RX5808 node modules are mounted vertically ... improved cooling Communication between the STM32 processor and the Raspberry Pi is via ...

Floating point is oddly low on the BeagleBone Black, and I’m going to chalk that up to me not setting the compiler options correctly. The original Raspberry Pi was an interesting educational ...

Pimoroni Pico Plus 2 W board features RP2350B MCU, a Raspberry Pi RM2 WiFi & Bluetooth module, 16MB flash, 8MB PSRAM, GPIOs, ...