Anyone have any experience or problems using an NCE command station/power supply with Digitrax components such as the PM42 or BDL168's? How about the cab buss / Loconet? (not interested in …

Date: 09/13/15 17:50 Digitrax DCC Decoder Lighting Question Author: northridgeswitcher Ok > if you want to program the following for a current Digitrax Decoder like a DN163K1C to do the following …

The Digitrax system provides BDL168s for detection and SE74 (SE8C replacement) for signal driving but relies on a computer running third party software for the signal logic.

A while back there was a set of instructions about clearing the dreaded slot max from a Digitrax command station. I down loaded the instructions and used it successfully at our club layout. I have …

I put a new Digitrax DZ125PS into my new OO scale Bachmann Ivatt 2MT today. I'd tested the locomotive on DC earlier and it ran very smoothly and quietly (very little PWM-induced …

I started my layout nearly 5 years ago using tortoises, Digitrax DS64s and JRMI. The Walthers control system came out after most of my power turnouts were installed.

The main power supply comes from Digitrax's PS2012, with the wiring done as per the diagrams provided (where the positive from the power supply is connected to the + input on both the command …

Digitrax decoder SDH167D Author: bluesboyst Hi, I have 4 digitrax decoders SDH167D. when I use my NCE Pro CAB to assign the locomotive number in the decoder it recognizes the manufacturer but …

The Digitrax current keeper has a plug with a black and red wire but the circuit is too big to fit in the loco. The TCS part has a blue wire and a black/white striped wire with a 2 pin plug. The Soundtraxx …

Re: To Reset Digitrax DT400 and... Author: CNJRoss The only way to reset a DT400 I'm aware of is to set options 1 thru 3 to the factory default indicated in the manual: Option 1 - x01 Option 2 - x23 …